Light Source
For black and white film only: You will only care about even and strong light, everything else we say about light 'quality' and CRI and color is unimportant if you only scan BW.
Color
Scanning color is a bit more complex, and different light sources have different build-ups of wavelengths. Essentially a bad light source can have a big ‘gap’ in a color, so that, for example, the blue in your image is rendered very dull, if as blue at all, and not some other color.
You will see a lot of talk about 'CRI' - this stands for Color Rendering Index, and is an attempt at making a scale that represents the accuracy of a light. Click here to read more about color rendering. CRI above 90 is good, anything below is unsuited for color scanning.
General Points
- You want a bright light to give your scan a short shutter speed to minimize vibrations
- For color scanning you want a CRI above 90
- Your light has to evenly light up the film area
- The light needs to sit flat on the table
Light Source Recommendations
Note: The categories below are ordered by price, not by quality.
|
Use What You Have |
Free if you own a suitable device |
|
|
Most modern screens actually produce very accurate color when used as a light source. To use them, download an app that lets you fill the screen with white - there are many of these, but searching 'screen flashlight' will land you results for what you want - alternatively you could try searching 'color light'. A phone will be too small to use for medium format and could be too small when scanning 35mm with the Manual Advancer. If you have a tablet or iPad, those are great options too! Note: If you are scanning without the Manual Advancer, your film will sit very close to the surface of your light. This can make the pixel grid of your screen show up in the scan. The Manual Advancer adds distance and avoids this. Pros Cons |
| Fine for BW |
10-30€ |
|
|
Using a 'tracing pad' or 'drawing light' can be a very cheap way of doing BW scanning. However, because of the poor colors most of them produce this is not a good option for scanning color slide or color negative. Note: Some of these will not have even enough lighting. We recommend using the Manual Advancer for extra separation from the light. Pros Cons |
| Our Recommended Light: CineStill CS-LITE | |
|
|
The CineStill CS-LITE is the light we recommend and sell for the studio360. Put it in the studio360 Light Adapter (CS-LITE) to make it sit flat with leveling feet, and screw the Manual Advancer on top for one solid unit. The easy120 has a CS-LITE built in. |
| Light Panel: Kaiser Slimlite Plano |
100-150€ |
|
|
The Kaiser Slimlite Plano is a popular light source for scanning and is quite easy to find. However, it comes with a few drawbacks and a high price-tag. Pros Cons |





