Skip to content
No hidden fees: All Duties and Taxes calculated at the checkout.

Light Source

For black and white film only: You will only care about even and strong light, everything else we say about light 'quality' and CRI and color is unimportant if you only scan BW.

Color
Scanning color is a bit more complex, and different light sources have different build-ups of wavelengths. Essentially a bad light source can have a big ‘gap’ in a color, so that, for example, the blue in your image is rendered very dull, if as blue at all, and not some other color.
You will see a lot of talk about 'CRI' - this stands for Color Rendering Index, and is an attempt at making a scale that represents the accuracy of a light. Click here to read more about color rendering. CRI above 90 is good, anything below is unsuited for color scanning.

General Points

  • You want a bright light to give your scan a short shutter speed to minimize vibrations
  • For color scanning you want a CRI above 90
  • Your light has to evenly light up the film area
  • The light needs to sit flat on the table

Light Source Recommendations

Note: The categories below are ordered by price, not by quality.

Use What You Have

Free if you own a suitable device

 

Most modern screens actually produce very accurate color when used as a light source. To use them, download an app that lets you fill the screen with white - there are many of these, but searching 'screen flashlight' will land you results for what you want - alternatively you could try searching 'color light'.  

A phone will be too small to use for medium format and could be too small when scanning 35mm with the Manual Advancer. If you have a tablet or iPad, those are great options too!

Note: If you are scanning without the Manual Advancer, your film will sit very close to the surface of your light. This can make the pixel grid of your screen show up in the scan. The Manual Advancer adds distance and avoids this.

Pros
• Great color accuracy
• Cheap or free
• Quite easy to set up

Cons
• Quite long shutter speeds - you will have to be very careful about vibrations
• Phones are often too small
• Without the Manual Advancer, the pixel grid of your screen can show up in your scans

 

Fine for BW

10-30€

 

Using a 'tracing pad' or 'drawing light' can be a very cheap way of doing BW scanning. However, because of the poor colors most of them produce this is not a good option for scanning color slide or color negative.

Note: Some of these will not have even enough lighting. We recommend using the Manual Advancer for extra separation from the light.

Pros
• Cheap
• OK Quality for Black and white
• Often come in about A5 size (about half of US letter size)

Cons
• Quite long shutter speeds - you will have to be very careful about vibrations
• Not suitable for color scanning
• Often larger than a VALOI holder leading to light spilling over the edge - mask that off in case of reflections

 

Our Recommended Light: CineStill CS-LITE

CineStill CS-LITE

The CineStill CS-LITE is the light we recommend and sell for the studio360. Put it in the studio360 Light Adapter (CS-LITE) to make it sit flat with leveling feet, and screw the Manual Advancer on top for one solid unit. The easy120 has a CS-LITE built in.


Light Panel: Kaiser Slimlite Plano

100-150€

 

The Kaiser Slimlite Plano is a popular light source for scanning and is quite easy to find. However, it comes with a few drawbacks and a high price-tag.

Pros
• Good color accuracy
• Brighter than a phone/tablet
• Easy to use and set up
• Slim design

Cons
• Not as bright as a video light - you will have to be careful about vibrations
• Expensive
• Some models are larger than a VALOI holder leading to light spilling over the edge - mask that off in case of reflections