easy35 126 Film Holder

$64.00 AUD

Shipping calculated at checkout.

For use with the easy35, this 126 Holder scans 35mm wide 126 film with a frame size of 26.5x26.5mm. Its asymmetrical design accommodates the offset frame of 126 film.

Film Format 35mm Sprocket 35mm Slide 35mm Half-Frame APS 110 126 Minox

The VALOI store is opening early 2026, for now please order from Kamerastore.com

Supports 26.5×26.5mm Frames on 126 Film
Quick Scanning Push-Pull Mechanism
Keeps Film Flat
Anti-Reflective Design

Film Holder

This product is compatible within the following VALOI systems:

easy35

Change your mind? Not satisfied? Let us know within 30 days of delivery for a return and refund. Refund Policy

Questions about this product or a purchase? Contact us by email or chat with us during business hours. Contact VALOI

Usually purchased with this item:

Detailed Description

Product: easy35 126 Film Holder

The easy35 126 holder allows you to scan 126 film that is 35mm wide and has a frame size of 26.5x26.5mm or less. The holder has an asymmetrical design, showing more of one side of the frame than the other, in the same way the 126 frame is offset on the film. The holders fits into the easy35 system just like any other compatible holder - by sliding out the existing holder and sliding in this new holder.

The gate dimensions are approximately: Length 32mm Width 32mm allowing you to see the whole frame and the some of the rebate area around.

In use

VALOI easy35 holders work by passing the film through a thin slit passing through the whole holder and out on the other side. This way, you can conveniently push or pull the film through all the way, saving you time and effort compared to a traditional clam shell holder.

All VALOI holders employ a double-S curve design, where the slit that the film is passed through curves before and after the scanning gate. By bending the film slightly in one direction on both sides of the film, greater flatness is achieved than would be possible with a straight slit.

Compatibility

It is compatible with all easy35 units. The holder is conveniently replaced by releasing a single screw screw and pushing the original holder out, and the new one in.

This holder is notcompatible with the VALOI 360 system. Please see the available holders for that by searching 360 Holder.