{"title":"360 Bases \u0026 Stands","description":"","products":[{"product_id":"360-essential-copy-stand-v2","title":"360 Essential Copy Stand v2","description":"\u003cp\u003e \u003cstrong\u003eRe-released in a new version with a custom made heavy steel base:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavier base than the v1\u003c\/li\u003e\n\u003cli\u003eQuick-release option the column, allowing quick disassembly\u003c\/li\u003e\n\u003cli\u003eBlack powder-coated base\u003c\/li\u003e\n\u003cli\u003eEasier to assemble\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe VALOI 360 Essential Copy Stand will hold your camera, allow you to change the height up and down with relative ease and lets you easily attach your camera in a position pointing down.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePoints your camera down at the desk to allow for easy scanning\u003c\/li\u003e\n\u003cli\u003eEasily regulate the height of the stand with a simple lock and slide\u003c\/li\u003e\n\u003cli\u003eWide grip-area for the head to hold the camera firmly\u003c\/li\u003e\n\u003cli\u003eLarge custom aluminium tripod screw for great ergonomics and a firm grip on your camera\u003c\/li\u003e\n\u003cli\u003eWide area to allow space for your hands\u003c\/li\u003e\n\u003cli\u003eAluminium and construction providing stability while being affordable\u003c\/li\u003e\n\u003cli\u003eEasy user-assembly\u003c\/li\u003e\n\u003cli\u003e690mm height\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOptimised for Scanning\u003c\/h3\u003e\n\u003cp\u003eUnlike a tripod, which is meant to point your camera at a subject in front of you, the scanning stand points your camera down at the desk where you will place your film holder. From here, you can easily regulate the height by sliding the head up and down the rail of the stand instead of being forced to re-adjust the legs of a tripod - this makes it much quicker to set up and get scanning with than a traditional tripod.\u003c\/p\u003e\n\u003ch3\u003eA Camera Head Designed for Scanning and Ergonomics\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThe head of our stand is custom made and especially designed for the task of scanning. The shape of it supports the camera sturdily while providing a wide front, covered in a rubber material, that grips onto the base of the camera to keep it from swinging. The wider front also allows for a large, custom made for this stand, 40mm diameter tripod screw and for your hands to tighten it to tighten it with ease. \u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThe chart below will tell you if you need the extension or not (assuming you scan 120 film - if you only scan 35mm film, you never need the extension for normal focal length lenses). The compatibility is based on our judgement of if the stand is stable enough or not.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSetup\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAPS-C mirrorless camera + 60mm or shorter lens\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM4\/3 camera + 40mm or shorter lens\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAPS-C DSLR + 60mm or shorter lens\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eM4\/3 or APS-C camera with 60mm or longer lens\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAPS-C camera with 90mm lens or longer\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmaller full-frame mirrorless camera + 70mm or shorter lens\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLarger full-frame mirrorless camera + 70mm or shorter lens\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSmaller full-frame mirrorless camera with 90mm lens or longer\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eYes*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLarger full-frame mirrorless camera + 90mm lens or longer\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePro-level Full-frame DSLR \u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e* \u003cem\u003eThis setup is pushing the limit of what we recommend for the stand. You may have to be more patient and more careful if using this stand with this setup. Failing to do this can result in blurry pictures. If you are unsure - get in touch at hello@valoi.co\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCosmetic condition: \u003c\/strong\u003eThe metal parts on this product may contain small scratches or scuffs due to the manufacturing and shipping of it. This is normal and has no impact on function - we will not replace parts with minor cosmetic damage.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003e\u003cspan\u003eAdditional accessories are necessary to produce a final image, including a digital camera, a close-focusing lens and a light source. See our gear-guide for more at valoi.co.\u003c\/span\u003e\u003c\/i\u003e\u003c\/p\u003e","brand":"VALOI","offers":[{"title":"Default Title","offer_id":46858351739032,"sku":"VLESSTANDb","price":145.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/8350\/5304\/files\/CatalogImage_EssentialCopystandV2-04015-WEB2048.jpg?v=1754051349"},{"product_id":"360-novoflex-castel-mini-ii-focusing-rack","title":"360 Novoflex CASTEL-MINI II Focusing Rack","description":"\u003cp\u003e\u003cem\u003eMay come branded in black and red, with VALOI logo instead of original Novoflex colors.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe Novoflex CASTEL-MINI II focusing rack is intended for fine adjustments when doing fine macro work like digitizing film using the VALOI 360 system. It allows you to move the camera mounted on it in small adjustments with a smooth geared mechanism and then securely lock it.\u003c\/p\u003e\n\u003cp\u003eThis rack is the quality you expect from Novoflex and pairs perfectly with the Novoflex REPRO 650 for VALOI stand that we sell. We also sell them together as a bundle for a small discount.\u003c\/p\u003e\n\u003cp\u003eIt is compatible even with heavier cameras as the mechanism is sturdy and built from quality materials with minimal plan.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFull-metal construction\u003c\/li\u003e\n\u003cli\u003eFine-geared rack-and-pinion mechanism\u003c\/li\u003e\n\u003cli\u003eRubber grip area for the camera base\u003c\/li\u003e\n\u003cli\u003ePrinted scale for repeatable results\u003c\/li\u003e\n\u003cli\u003eLocking mechanism that holds even heavy cameras\u003c\/li\u003e\n\u003cli\u003eSmall footprint and weight\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo anyone who knows the Novoflex products, they know that this is a solid piece of equipment - it is called the professional stand for a reason. Their products are always made from the best materials and with stability and professional use in mind.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Novoflex\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNovoflex is an old German brand established in the mid-20th century and have been making high quality camera accessories ever since. Today they make a range of made-in-Germany, super high quality products ranging from stands, tripods and specialist tripod heads to bellows and lens converted. Novoflex products are expensive, but worth the money if you know what you want.\u003c\/p\u003e","brand":"VALOI","offers":[{"title":"Default Title","offer_id":46858352001176,"sku":"VLNXRACK","price":179.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/8350\/5304\/files\/NovoflexMacrorail-03716-WEB2048_ebcedff0-4296-4ecc-87f2-394914c1f72a.jpg?v=1754051388"},{"product_id":"360-holder-plate-for-lightadapter-cs-lite-v2","title":"360 Holder Plate for LightAdapter (CS-LITE) v2","description":"\u003cp\u003e\u003cstrong\u003eThe v2 upgrade (09\/01\/2025 onward) provides two primary benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYou can now lock down the film holder using two thumb screws that press it into the frame. This ensures it stays in a consistent position, improving consistency.\u003c\/li\u003e\n\u003cli\u003eThe tabs holding onto the masks located under the holder are now increased in number from 4 to 6. This improves stability of the mask and makes it less fiddly to put in place.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHolder Plate\u003c\/li\u003e\n\u003cli\u003e4x thumb screws\u003c\/li\u003e\n\u003cli\u003e2x VALOI M4 thumb screw for fastening holder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eThis does not include the LightAdapter or light source.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003ePlease see the listing for the 360 LightAdapter for CS-LITE separately (where you can also add this same Holder Plate at a reduced price when you buy your LightAdapter).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUse your holders right on-top of our light source solution without compromising on stability!\u003c\/strong\u003e This plate attaches to the top of your LightAdapter and a hole perfectly sized for the VALOI 360 holders to slot into.\u003c\/p\u003e\n\u003cp\u003eThe plate attaches securely to the LightAdapter with 4 supplied thumb-nuts. Attach the plate, place your holder in it and pull film through to scan - easy, stable and secure! The combination of this, the LightAdapter and CS-LITE light source is the perfect combination for someone to get started with a stable scanning setup and one of the best light sources available!\u003c\/p\u003e","brand":"VALOI","offers":[{"title":"Default Title","offer_id":46858355605656,"sku":"VL026b","price":29.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/8350\/5304\/files\/HolderPlatev3_listing-04858_web2048_f37df0cf-f5a9-4aba-971b-8f2fe9c70a38.jpg?v=1770730310"},{"product_id":"360-novoflex-repro-650-copy-stand","title":"360 Novoflex Repro 650 Copy Stand","description":"\u003cp\u003eThis is a special stand made for VALOI by Novoflex. The stand is extra long to accommodate longer lenses than their standard issue stand. \u003cstrong\u003eYou can find the compatibility chart below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGreat stability and full-metal construction\u003c\/li\u003e\n\u003cli\u003e65cm length for use with longer focal length lenses\u003c\/li\u003e\n\u003cli\u003eHeight scale printed on it for easier positioning\u003c\/li\u003e\n\u003cli\u003eComes with 15cm solid aluminum spacer for your camera\u003c\/li\u003e\n\u003cli\u003eSmall footprint as it clamps onto the table\u003c\/li\u003e\n\u003cli\u003eTable must have a non-slanted edge and be less than 3.1cm thick\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo anyone who knows the Novoflex products, they know that this is a solid piece of equipment - it is called the professional stand for a reason. Their products are always made from the best materials and with stability and professional use in mind.\u003c\/p\u003e\n\u003cp\u003eIt is not for everyone, but if you demand absolute quality, a copy stand like this can take your scanning to a new level. The stand is easy to put away and even to travel with, as it does not have a base and there takes a smaller footprint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: The stand must be clamped onto a table that is no thicker than 3.1cm and has a relatively straight (not slanted edge) blade.\u003c\/p\u003e\n\u003cp\u003eThe stand sold here comes with the \u003cstrong\u003eNovoflex REPRO spacer (15cm)\u003c\/strong\u003e that adds extra space between the camera and column to allow comfortable use with any VALOI products (not in the pictures).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWeight 1.5kg\u003c\/li\u003e\n\u003cli\u003ePole length: 65cm\u003c\/li\u003e\n\u003cli\u003eMax clamp width (maximum table thickness): 3.1cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLens focal length compatibility:\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensor size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eLens Focal Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull Frame\u003c\/td\u003e\n\u003ctd\u003eUp to 135mm\u003c\/td\u003e\n\u003ctd\u003eUp to 6x9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAPS-C\u003c\/td\u003e\n\u003ctd\u003eUp to 90mm\u003c\/td\u003e\n\u003ctd\u003eUp to 6x9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eWe do not sell or support 4x5 or larger formats. Please measure the extension you need with your lens and camera combination and compare it to the useable length of this column.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Novoflex\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNovoflex is an old German brand established in the mid-20th century and have been making high quality camera accessories ever since. Today they make a range of made-in-Germany, super high quality products ranging from stands, tripods and specialist tripod heads to bellows and lens converted. Novoflex products are expensive, but worth the money if you know what you want.\u003c\/p\u003e","brand":"VALOI","offers":[{"title":"Default Title","offer_id":46858356752536,"sku":"VL023","price":299.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/8350\/5304\/files\/Novoflex_VALOI-250003-WEB2048.jpg?v=1772106719"},{"product_id":"360-film-advancer","title":"360 Film Advancer","description":"\u003cp\u003e\u003cstrong\u003eAs of May 2024 this listing is for the Advancer v2.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVALOI Advancer v2\u003c\/li\u003e\n\u003cli\u003eVALOI Thumb screw for fastening holder\u003c\/li\u003e\n\u003cli\u003eVALOI Quick Start Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDoes not include items shown in pictures: VALOI 360 6x45 mask, VALOI 360 Duster\u003c\/p\u003e\n\u003cp\u003eThis product requires a VALOI Holder: either the 35mm Holder or 120 Holder - which are not included in this listing. It also requires simple assembly and a small-medium Phillips screwdriver.\u003c\/p\u003e\n\u003cp\u003eWith the Advancer you get a host of new features all set in a sturdy all-steel construction:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSpeed: Scan a roll of 35mm film as quick as in two minutes\u003c\/li\u003e\n\u003cli\u003eStability: Sturdy rubber feet and a heavy steel construction to keep everything in place\u003c\/li\u003e\n\u003cli\u003eLeveling: More than 10mm fine threaded adjustment on the feet\u003c\/li\u003e\n\u003cli\u003eEvenly lit scans: The film is lifted approximately 5cm off the light source to diffuse imperfections on the light\u003c\/li\u003e\n\u003cli\u003eMulti-format support: With rollers set up to be adjustable for almost any roll film formats ever made\u003c\/li\u003e\n\u003cli\u003eAccess to accessories like the Duster\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAdditional accessories are necessary to produce a final image, including a digital camera, a close-focusing lens and a light source.\u003c\/p\u003e\n\u003ch4\u003eOverview of different Advancer versions\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003ev1.0\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShipped during the Kickstarter in 2022 until approximately spring 2023.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack quite hard rollers\u003c\/li\u003e\n\u003cli\u003eThe knob was fastened from the end with a Phillips head screw (many units will have been upgraded to v2 knobs that are fastened from the side)\u003c\/li\u003e\n\u003cli\u003eThe accessory screw holes on the front and back of the Advancer are placed in the middle of the plate.\u003c\/li\u003e\n\u003cli\u003eSome units had issues with low roller pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ev1.3\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShipped from spring 2023 to mid-May 2024.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShipped with red softer rollers\u003c\/li\u003e\n\u003cli\u003eThe knob was the new v2 type, with a fastening on the side using a set\/grub screw\u003c\/li\u003e\n\u003cli\u003eThe accessory screw holes on the front and back were placed further down to lower the Duster\u003c\/li\u003e\n\u003cli\u003eThe roller pressure was increased and units should not have problems with that.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ev2\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVersion shipping from mid-May 2024.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShips with red softer rollers (same as v1.3)\u003c\/li\u003e\n\u003cli\u003eHas a larger screw on the knob due to the smaller screws having issues with stripping (not included in upgrade kit)\u003c\/li\u003e\n\u003cli\u003eHas 6 tabs instead of 4 in the frame for holding the masks in place\u003c\/li\u003e\n\u003cli\u003eHas 2x M4 threaded holes on-top for tightening down the holder, and ships with 2x M4 thumb screws to fit in those holes.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"VALOI","offers":[{"title":"Default Title","offer_id":46858360029336,"sku":"VL003","price":175.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/8350\/5304\/files\/Advancerv2--WEB2048-2_19e9078a-535c-4f78-941b-27ba11a6a29b.jpg?v=1754051916"},{"product_id":"360-lightadapter-for-cs-lite","title":"360 LightAdapter for CS-LITE","description":"\u003cp\u003e\u003cstrong\u003eThis item has replaced the Adapter 104 and is not compatible with the Raleno light sources.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe VALOI 360 LightAdapter is made to be used with the VALOI Advancer and cannot be used with the Holders alone.\u003cmeta charset=\"utf-8\"\u003e To use this light adapter without the Advancer, select the bundle that includes the Holder Plate.\u003c\/p\u003e\n\u003cp\u003eThis product includes the \u003cmeta charset=\"utf-8\"\u003e360 LightAdapter for CS-LITE only. You can also browse the 360 LightAdapter for CS-LITE bundles separately — these let you add the Holder Plate, CS-LITE, or both at a reduced price when purchasing your LightAdapter.\u003c!-- notionvc: 2fd10138-c59b-4a49-a873-b652da39f3ff --\u003e\u003ca href=\"https:\/\/valoi.co\/en-int\/products\/360-light-adapter-with-holder-plate?variant=48007937720472\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eUpgrade your setup with the VALOI LightAdapter for CS-LITE light source and get a more complete, stable scanning solution that integrates perfectly with the Advancer.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStrong and heavy 2.5mm steel construction\u003c\/li\u003e\n\u003cli\u003eScrews included to attach the Advancer on-top for a rigid structure\u003c\/li\u003e\n\u003cli\u003eAttachment screw for the CS-LITE tripod socket to lock it in place\u003c\/li\u003e\n\u003cli\u003eAdjustable rubber feet for good grip and leveling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe VALOI LightAdapter is the perfect solution for the VALOI Advancer. It adapts the CS-LITE to work perfectly with your VALOI Advancer. It has the same rubber feet that the Advancer does, letting you adjust the corners for a perfectly parallel film and camera.\u003c\/p\u003e\n\u003cp\u003eThe Advancer screws right on-top of the LightAdapter for a tight, rigid and stable structure, perfect for scanning. You will no longer have to balance your scanning rig ontop of an ill fitting light table. The CS-LITE then slides into the LightAdapter and secures with the tripod socket screw from the side.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe LightAdapter is made out of thicker steel than the Advancer to provide extra weight: The 2.5mm sheet steel bent to shape and painted in the same black powder coating as the Advancer. It provides a flat, stable scanning platform for a better scanning experience and a more consistent result.\u003c\/p\u003e","brand":"VALOI","offers":[{"title":"Default Title","offer_id":46858360127640,"sku":"VL005a","price":69.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/8350\/5304\/files\/untitled-06477-WEB2048.jpg?v=1770793252"},{"product_id":"360-lightadapter-cs-lite","title":"360 LightAdapter \u0026 CS-LITE","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThis bundle includes the 360 LightAdapter for CS-LITE and the 360 Cinestill CS-LITE. The \u003cmeta charset=\"utf-8\"\u003e360 LightAdapter for CS-LITE \u003cmeta charset=\"utf-8\"\u003ewithout the light source is also available individually.\u003c!-- notionvc: d4b1e3d3-27c6-48de-88e1-48ba8701e53b --\u003e\u003c\/p\u003e\n\u003cp\u003eYou can also browse other 360 LightAdapter for CS-LITE bundles, these let you add the Holder Plate, CS-LITE, or both at a reduced price when purchasing your LightAdapter.\u003c!-- notionvc: 2fd10138-c59b-4a49-a873-b652da39f3ff --\u003e\u003ca href=\"https:\/\/valoi.co\/en-int\/products\/360-light-adapter-with-holder-plate?variant=48007937720472\"\u003e\u003c\/a\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003ch5\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003e360 LightAdapter for CS-LITE\u003c\/strong\u003e\n\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003eThis adapter connects the VALOI Advancer with the Cinestill CS-LITE, offering a strong steel construction with adjustable rubber feet. Provides a stable and level scanning platform, securing the light source for better results.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e360 Cinestill CS-LITE\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003eThe CS-LITE Camera Scanning Light Source is a compact camera scanning light source. It was designed to provide film photographers higher-quality light with improved color management, in order to facilitate the process of scanning their favorite 35mm and medium format films with a digital camera.\u003c\/span\u003e\u003c\/p\u003e","brand":"VALOI","offers":[{"title":"Default Title","offer_id":48007847411864,"sku":"VL005b","price":110.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/8350\/5304\/files\/untitled-06506-WEB2048.jpg?v=1770726416"},{"product_id":"360-lightadapter-holder-plate","title":"360 LightAdapter \u0026 Holder Plate","description":"\u003cp\u003eThis bundle includes the 360 LightAdapter for CS-LITE and the 360 Holder Plate for LightAdapter (CS-LITE) v2. The 360 LightAdapter for CS-LITE is also available individually.\u003c!-- notionvc: e67d37ac-3d58-4cd3-8634-fef09b43f70a --\u003e\u003c\/p\u003e\n\u003cp\u003eYou can also browse other 360 LightAdapter for CS-LITE bundles separately — these let you add the Holder Plate, CS-LITE, or both at a reduced price when purchasing your LightAdapter.\u003cmeta charset=\"utf-8\"\u003e\u003ca href=\"https:\/\/valoi.co\/en-int\/products\/360-lightadapter-cs-lite?variant=48007847411864\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e360 LightAdapter for CS-LITE\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis adapter connects the VALOI Advancer with the Cinestill CS-LITE, offering a strong steel construction with adjustable rubber feet. Provides a stable and level scanning platform, securing the light source for better results.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e360 Holder Plate for LightAdapter (CS-LITE) v2\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eSecurely mount your holders on top of the LightAdapter for CS-LITE with this plate. It fits all VALOI 360 holders for stable scanning. Includes screws and thumb-nuts for attachment. \u003c\/p\u003e","brand":"VALOI","offers":[{"title":"Default Title","offer_id":48007937720472,"sku":"VL005c","price":79.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/8350\/5304\/files\/HolderPlatev3_listing-04863_web2048.jpg?v=1770730310"},{"product_id":"360-lightadapter-cs-lite-holder-plate","title":"360 LightAdapter \u0026 CS-LITE + Holder Plate","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eThis bundle includes the 360 LightAdapter for CS-LITE, the 360 Cinestill CS-LITE, and the 360 Holder Plate for LightAdapter (CS-LITE) v2. \u003cmeta charset=\"utf-8\"\u003eThe \u003cmeta charset=\"utf-8\"\u003e360 LightAdapter for CS-LITE \u003cmeta charset=\"utf-8\"\u003ewithout the light source is also available individually.\u003c!-- notionvc: e67d37ac-3d58-4cd3-8634-fef09b43f70a --\u003e\u003c\/p\u003e\n\u003cp\u003eYou can also browse other 360 LightAdapter for CS-LITE bundles separately — these let you add the Holder Plate, CS-LITE, or both at a reduced price when purchasing your LightAdapter.\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e360 LightAdapter for CS-LITE\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis adapter connects the VALOI Advancer with the Cinestill CS-LITE, offering a strong steel construction with adjustable rubber feet. Provides a stable and level scanning platform, securing the light source for better results.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e360 Cinestill CS-LITE\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe \u003c\/span\u003eCS-LITE Camera Scanning Light Source\u003cspan\u003e is a compact camera scanning light source. It was designed to provide film photographers higher-quality light with improved color management, in order to facilitate the process of scanning their favorite 35mm and medium format films with a digital camera.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e360 Holder Plate for LightAdapter (CS-LITE) v2\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eSecurely mount your holders on top of the LightAdapter for CS-LITE with this plate. It fits all VALOI 360 holders for stable scanning. Includes screws and thumb-nuts for attachment. \u003c!-- notionvc: b84fc5f8-1ca1-4ff1-b6b7-507ba53d0b3a --\u003e\u003c\/p\u003e","brand":"VALOI","offers":[{"title":"Default Title","offer_id":48007952498840,"sku":"VL005d","price":120.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/8350\/5304\/files\/HolderPlatev3_listing-04863_web2048_f35dc243-b2e5-43b4-b221-b7323d00844b.jpg?v=1768313093"},{"product_id":"360-novoflex-repro-650-copy-stand-focusing-rack-castel-mini-ii","title":"360 Novoflex Repro 650 Copy Stand \u0026 Focusing Rack (CASTEL-MINI II)","description":"\u003cp\u003e\u003cem\u003eMay come branded in black and red, with VALOI logo instead of original Novoflex colors.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a professional bundle made for VALOI by Novoflex, combining the extra-long Repro 650 stand with the CASTEL-MINI II focusing rack. This set is designed for those who demand absolute quality and precision when digitizing film using the VALOI 360 system. \u003cstrong\u003eYou can find the compatibility chart below.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGreat stability and full-metal construction\u003c\/li\u003e\n\u003cli\u003e65cm length for use with longer focal length lenses\u003c\/li\u003e\n\u003cli\u003eFine-geared rack-and-pinion mechanism for precise macro focusing\u003c\/li\u003e\n\u003cli\u003eHeight scale printed on the column and rack for repeatable positioning\u003c\/li\u003e\n\u003cli\u003eComes with 15cm solid aluminum spacer for your camera\u003c\/li\u003e\n\u003cli\u003eLocking mechanism that holds even heavy cameras\u003c\/li\u003e\n\u003cli\u003eSmall footprint as it clamps onto the table (less than 3.1cm thick)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo anyone who knows Novoflex products, they know that this is a solid piece of equipment - it is called the professional stand for a reason. Their products are always made from the best materials and with stability and professional use in mind. This bundle allows you to move the camera in small, smooth adjustments and securely lock it into place, taking your scanning to a new level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: The stand must be clamped onto a table that is no thicker than 3.1cm and has a relatively straight (not slanted) edge. The included \u003cstrong\u003eNovoflex REPRO spacer (15cm)\u003c\/strong\u003e adds extra space between the camera and column to allow comfortable use with any VALOI products.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTotal Weight: Approx. 2kg\u003c\/li\u003e\n\u003cli\u003ePole length: 65cm\u003c\/li\u003e\n\u003cli\u003eMax clamp width (maximum table thickness): 3.1cm\u003c\/li\u003e\n\u003cli\u003eFocusing Rack: CASTEL-MINI II with rubber grip area\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLens focal length compatibility:\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSensor size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eLens Focal Length\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull Frame\u003c\/td\u003e\n\u003ctd\u003eUp to 135mm\u003c\/td\u003e\n\u003ctd\u003eUp to 6x9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAPS-C\u003c\/td\u003e\n\u003ctd\u003eUp to 90mm\u003c\/td\u003e\n\u003ctd\u003eUp to 6x9\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eWe do not sell or support 4x5 or larger formats. Please measure the extension you need with your lens and camera combination and compare it to the useable length of this column.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAbout Novoflex\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNovoflex is an old German brand established in the mid-20th century and have been making high quality camera accessories ever since. Today they make a range of made-in-Germany, super high quality products ranging from stands, tripods and specialist tripod heads to bellows and lens converted. Novoflex products are expensive, but worth the money if you know what you want.\u003c\/p\u003e","brand":"VALOI","offers":[{"title":"Default Title","offer_id":48176123805848,"sku":"VL023b","price":469.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/8350\/5304\/files\/Novoflex_VALOI-250003-WEB2048.jpg?v=1772106719"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/8350\/5304\/collections\/Advancerv2-0975-WEB2048_740a7982-0953-480a-a042-e78e9083b65e.jpg?v=1768475339","url":"https:\/\/valoi.co\/en-us\/collections\/360-bases-stands.oembed","provider":"VALOI","version":"1.0","type":"link"}